Difference between revisions of "Sismo Hardware"
From Manuals
Navymustang (talk | contribs) m (→Fwd Overhead) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 9: | Line 9: | ||
===GENERAL CONFIGURATION=== | ===GENERAL CONFIGURATION=== | ||
| − | + | * In ProSim737 System->Config->Configuration->Drivers enable the option "Sismo ethernet boards support" | |
| − | + | * Restart ProSim737 | |
===MIP=== | ===MIP=== | ||
| Line 20: | Line 20: | ||
* In ProSim737 System->Config->Configuration->Drivers, click on "Advanced" button next to "Sismo ethernet boards support", in the new window, select "Fwd OVH" tab and enabled the panels you have connected | * In ProSim737 System->Config->Configuration->Drivers, click on "Advanced" button next to "Sismo ethernet boards support", in the new window, select "Fwd OVH" tab and enabled the panels you have connected | ||
| − | === | + | ===Aft Overhead=== |
* See General configuration | * See General configuration | ||
* In ProSim737 System->Config->Configuration->Drivers, click on "Advanced" button next to "Sismo ethernet boards support", in the new window, select "Aft OVH" tab and enabled the panels you have connected | * In ProSim737 System->Config->Configuration->Drivers, click on "Advanced" button next to "Sismo ethernet boards support", in the new window, select "Aft OVH" tab and enabled the panels you have connected | ||
| + | |||
===Pedestal=== | ===Pedestal=== | ||
* See General configuration | * See General configuration | ||
Latest revision as of 16:39, 21 April 2018
Contents
1 General information
The new release of ProSim:737 2.X does not require use SC-Pascal Scripts to control the Sismo´s Plug&Fly Modules Ethernet using SimCards.
The application recognizes automatically the module based on the Host Port.
Please refer to the manual provided by Sismo - USING PROSIM737 V2.X WITH SISMO MODULES ETHERNET
2 Supported specific hardware
2.1 GENERAL CONFIGURATION
- In ProSim737 System->Config->Configuration->Drivers enable the option "Sismo ethernet boards support"
- Restart ProSim737
2.2 MIP
- See General configuration
- In ProSim737 System->Config->Configuration->Drivers, click on "Advanced" button next to "Sismo ethernet boards support", in the new window, select !MIP" tab and enabled the panels you have connected
2.3 Fwd Overhead
- See General configuration
- In ProSim737 System->Config->Configuration->Drivers, click on "Advanced" button next to "Sismo ethernet boards support", in the new window, select "Fwd OVH" tab and enabled the panels you have connected
2.4 Aft Overhead
- See General configuration
- In ProSim737 System->Config->Configuration->Drivers, click on "Advanced" button next to "Sismo ethernet boards support", in the new window, select "Aft OVH" tab and enabled the panels you have connected
2.5 Pedestal
- See General configuration
- In ProSim737 System->Config->Configuration->Drivers, click on "Advanced" button next to "Sismo ethernet boards support", in the new window, select "Aft OVH" tab and enabled the panels you have connected
2.6 MCP
- See General configuration
- In ProSim737 System->Config->Configuration->Drivers, click on "Advanced" button next to "Sismo ethernet boards support", in the new window, select "MCP" tab and enable the EFIS you have connected
- No configuration required in ProSim737-MCP - but the MCP software must be running
3 Troubleshooting
TBA
