ProSim737 Hardware Connector

1 ProSim737 Hardware Connector

1.1 Introduction

The ProSim737 Hardware Connector module is used to connect USB hardware to secondary computers.

The ProSim737 Hardware Connector module may be installed across multiple secondary computers. It should never be installed on the primary computer.

Only for version 2.08 and lower Each networked computer, including the primary computer, requires the installation of SlimDx which can be downloaded form https://slimdx.org/download.php. It is recommended to install both x86 and x64 bit versions

• Start the ProSim737 Hardware connector and open the config page (File > Config)
• Enter the IP address of the primary computer.
• Restart the ProSim737 Hardware Connector, select the driver in ProSim737 System on the primary computer and connect the devices. The connected devices are listed in the ProSim737 System IO overview in the main screen.
• No configurations are done in the ProSim737 Hardware Connector.

1.2 Module instances and directory names

Only one instance of Hardware Connector is allowed per computer.

Multiple instances are allowed in the multi computer simulator setup.

Hardware connector can't run on the primary computer together with ProSim737 Systems

1.3 Supported hardware

Flightdeck Solutions (FDS)

Pololu

Direct Input devices (game controllers)

1.4 Options

TBA