Difference between revisions of "ProSim Audio"

From Manuals
Jump to: navigation, search
(Created page with "==ProSim737 Audio== ===General description=== The ProSim737 Audio module is a network enabled audio player that is controlled by the ProSim737 System module. In connection wit...")
 
Line 24: Line 24:
  
 
===Add Audio===
 
===Add Audio===
 +
 +
[[Category:ProSim737 Manual|9AUDIO]]

Revision as of 10:15, 29 September 2016

1 ProSim737 Audio

1.1 General description

The ProSim737 Audio module is a network enabled audio player that is controlled by the ProSim737 System module. In connection with the ProSim737 Audio module, the ProSim737 System module contains a comprehensive list of sound files, in addition personalised sounds can be added and stored for playback. The ProSim737 Audio module provides selectable playback events related to radio and cockpit sounds that can be heard from either chosen device, headsets or cockpit speakers.

1.2 Installing ProSim737 Audio

ProSim737 Audio is an optional program that can be used to play ProSim737 audio on a different computer than where the ProSim737 program is installed. This allows to build realistic sound configurations. Once configured, the program does not need any attention and will act as a relay to play any sound it is configured to play.

1.2.1 Installation

Installation is straightforward. If not already done, unpack the software archive ProSimAudio.zip to a directory and copy the contents of this directory to any computer that needs to run ProSim Audio. No additional files are needed. All required data, including the audio files, are automatically loaded from the ProSim737 main program when a connection is made.

ProSim737 Audio does not require FSUIPC of WideFS.

1.2.2 Configuration

To open the configuration screen of ProSim737 Audio, right click anywhere in the window and select “Config”.

Like all other ProSim737 modules, ProSim737 Audio needs to know the IP address of the machine running the ProSim737 main program. Fill in this information in the “Server” field.

After connection with the server has been established, the program will display all available sounds from the server. Enable a sound by clicking the button. After exiting the program, the enabled sounds will be stored. This ensures that they are enabled again when the program runs the next time.

After configuring sounds in ProSim737 Audio, all configured sounds will be played when required by the program. There is no configuration necessary in the main ProSim737 program.

1.3 Add Audio