Phidgets

1 General information

Phidgets modules are natively supported by ProSim, no need to install the Phidgets drivers.

If the Phidgets drivers/software is installed - it must not be running while ProSim is trying to access the hardware.

2 GENERAL CONFIGURATION

• In ProSim737 System->Config->Configuration->Drivers enable the option "Phidgets support"
• Restart ProSim737
• All connected devices should be listed in the main ProSim737 System window in the "IO Modules" field

3 ADVANCED CONFIGURATION

• You can set the LED Voltage and LED current limit (only for LED64 Advanced)
• You can adjust the speed and direction of the DC Motors

4 Supported generic hardware

TBA List of hardware

4.1 Digital inputs

• See General configuration
• Assign in ProSim737 System->Config->Configuration->Combined Config

4.2 Digital outputs

• See General configuration
• Assign using the output finder in ProSim737 System->Config->Configuration->Combined Config

4.3 Analog inputs

• See General configuration
• Assign and calibrated in ProSim737 System->Config->Configuration->Combined Config

4.4 Relays

• See General configuration
• Assign in ProSim737 System->Config->Configuration->Combined Config

4.5 Servos

• See General configuration
• Assign and calibrate in ProSim737 System->Config->Configuration->Combined Config

4.6 DC motors

• See General configuration
• Assign in ProSim737 System->Config->Configuration->Combined Config

5 Troubleshooting

TBA