Phidgets
From Manuals
Revision as of 16:37, 29 March 2018 by Martin.vsetecka (talk | contribs) (Created page with "==General information== Phidgets modules are natively supported by ProSim, no need to install the Phidgets drivers. If the Phidgets drivers/software is installed - it must no...")
Contents
1 General information
Phidgets modules are natively supported by ProSim, no need to install the Phidgets drivers.
If the Phidgets drivers/software is installed - it must not be running while ProSim is trying to access the hardware.
2 Supported generic hardware
TBA List of hardware
2.1 GENERAL CONFIGURATION
- In ProSim737 System->Config->Configuration->Drivers enable the option "Phidgets support"
- Restart ProSim737
- All connected devices should be listed in the main ProSim737 System window in the "IO Modules" field
2.2 ADVANCED CONFIGURATION
- You can set the LED Voltage and LED current limit (only for LED64 Advanced)
- You can adjust the speed and direction of the DC Motors
2.3 Digital inputs
- See General configuration
- Assign in ProSim737 System->Config->Configuration->Combined Config
2.4 Digital outputs
- See General configuration
- Assign using the output finder in ProSim737 System->Config->Configuration->Combined Config
2.5 Analog inputs
- See General configuration
- Assign and calibrated in ProSim737 System->Config->Configuration->Combined Config
2.6 Relays
- See General configuration
- Assign in ProSim737 System->Config->Configuration->Combined Config
2.7 Servos
- See General configuration
- Assign and calibrate in ProSim737 System->Config->Configuration->Combined Config
2.8 DC motors
- See General configuration
- Assign in ProSim737 System->Config->Configuration->Combined Config
3 Troubleshooting
TBA